Y-9C adopts top-notch Danish silicon carbide rods and innovates low-voltage driving technology, which can greatly reduce the thermal load of the silicon carbide rods and effectively extend their lifespan.
-
Fast temperature rise to 1530℃ in 20 minutes!
-
Y-9C Fast sintering furning for dental clinic
Y-9C is a fast sintering furnace specifically developed for dental clinics. It has a beautiful appearance, small size, and simple operation, making it very suitable for use by chairside
A crown can be sintered in only50 minutes
- Fast sintering and accurate temperature control
- Friendly interface and simple operation
- Small size and beautiful appearance
Y-9C technical parameters
-
1.Fast sintering of the fully form
2.Predrying
3.Maximum sintering temperature 1530 ℃℃
4.Finish glazing in 9 minutes
5.Maximum heating speed 200℃/ S
6.Ready to use after power on, without 2 hours
of preheating
7.Active cooling
8.Crown restoration 4-10(60mm dianeter tray)
9.W*L*H:27*36*56cm AND 29*22*13.5cm -
ELECTRIC POWER:
Operation range:100-120V 50/60HZ 230V 50/60HZ
Electric current:11.5ampere@110V 5.5ampere@230V
Power:max 1200wPOWER UNIT
Voltage controller. The service life of the silicon elema is effectively prolonged.VOICE PROMPT
Each stage has voice prompt. Program selection prompt
to prevent using wrong program.
YF-1650 adopts high-purity silicon molybdenum rods imported from Germany for heating, with a maximum power of 4000W heating system, which ensures heating efficiency while also improving the service life of the sintering furnace
-
Fast temperature rise to 1530℃ in 15 minutes!
-
YF-1650 Fast sintering furning for dental lab
YF-1650 is a fast sintering furnace specifically developed for dental lab. It has a beautiful appearance, Large furnace, capable of sintering up to 200 teeth at a time, and simple operation, making it very suitable for use by labside
A crown can be sintered in only50 minutes
- High power silicon molybdenum rod technology
- 100mm * 100mm furnace can crystallize any zirconia denture
- Humanized operation interface, simple and easy to learn
- High power silicon molybdenum rod technology
Technical parameters of YF-1650
-
Type of protection against electric shock:
Protection Class I device
Degree of protection against ingress of water:
Ordinary device
Setup location: Indoors in dry area
Height up to 2000 m
Temperature range: 5℃ to 40℃
(41°F to 104°F)
Relative humidity 80% up to 31℃ (87.8°F),
above this decreasing linearly
to 50% at 40℃(104°F), no condensation
Overvoltage category: II -
Pollution degree: 2
Mode of operation Continuous operation
Dimensions of unit (W x H x D in mm):
430x 780x 520
Dimensions of packaged unit (W x H x D in mm):
560X850X620
Furnace chamber: 100mm x 100 mm height
Maximum sintering temperature: 1,650℃
Approx. weight without packaging: 75 kg
Approx. weight including packaging: 85 kg
Rated line voltage : 230 V AC
Rated line frequency: 50/60Hz
Rated current consumption: 20 A
Maybe you also need 👇🏻
-
Professional R&D team
Guaranteed technical update of equipment, tools and materials
-
Professional dental lab
Guarantee that all products are fully validated
-
Specialized industrial workshop
Industrial production ensures timeliness of global supply
Focus on communication and research and development
We know that developing a truly successful product requires in-depth research, extensive testing, and a willingness to explore. That's why we listen to dentists and dental technicians and learn to understand their daily work needs.
We have our own denture factory and maintain close contact with more than 80 clinics around the world, understand their workflow and needs, and do our best to reconcile high efficiency with excellent aesthetics. We work closely with major universities, renowned research institutes and the best dental specialists around the world to take dentistry to the next level.