YS-10S Elema Fast Sintering Furnace

Fast temperature rise to 1530℃ in 15 minutes!

YF-10S is one of the few large sintering furnaces in the world that use elema. The equipment uses high-purity silicon carbide rods imported from Germany for heating, with zero pollution to teeth. A heating system with a maximum power of 3000W is used to ensure heating efficiency while also improving the service life of the sintering furnace

  • Y-10S

    Fast temperature rise to 1530℃ in 15 minutes!

  • Y-10S Fast Sintering Furning For Dental Lab

    YF-1650 is a fast sintering furnace specifically developed for dental lab. It has a beautiful appearance, Large furnace, capable of sintering up to 80 teeth at a time, and simple operation, making it very suitable for use by labsideA crown can be sintered in only50 minutes

    • High power silicon molybdenum rod technology
    • 90mm furnace can crystallize any zirconia denture
    • Humanized operation interface, simple and easy to learn
    CONTACT US 
  • CONTACT US 
CONTACT US

Technical parameters of YF-10S

    • Type of protection against electric shock:

    Protection Class I device

    • Pollutiondegree:2
    • Degree of protection against ingress of water:

    Ordinary device

    • Modeofoperation: Continuous operation
    • Setup location:

    Indoors in dry areaHeight up to 2000 m

    • Temperature range:

    5℃ to 40℃ (41°F to 104°F) Relative humidity 80% up to 31℃ (87.8°F), above this decreasing linearlyto 50% at 40℃(104°F), no condensation

    • Dimensionsofunit:360*460*590mm
    • Dimensionsofpackagedunit: 570*570*760mm
    • Furnacechamber: 90mm
    • Maximumsinteringtemperature: 1550℃
    • Weightwithoutpackaging: 39kg
    • Approx.weightincludingpackaging: 45kg
    • Ratedlinevoltage: 110AC/230VAC
    • Ratedlinefrequency: 50/60Hz
    • Ratedcurrentconsumption: 30A@110V25A@230V
    • Power:max3000w
    • Overvoltage category: II
Button label

Y-9C Fast Sintering Furnace For Clinic

Fast temperature rise to 1530℃ in 20 minutes!

Y-9C adopts top-notch Danish silicon carbide rods and innovates low-voltage driving technology, which can greatly reduce the thermal load of the silicon carbide rods and effectively extend their lifespan.

  • YF-9C

    Fast temperature rise to 1530℃ in 20 minutes!

  • Y-9C is a fast sintering furnace specifically developed for dental clinics. It has a beautiful appearance, small size, and simple operation, making it very suitable for use by chairside

    A crown can be sintered in only50 minutes

    • Fast sintering and accurate temperature control
    • Friendly interface and simple operation
    • Small size and beautiful appearance

Y-9C Technical Parameters

  • 1.Fast sintering of the fully form
    2.Predrying
    3.Maximum sintering temperature 1530 ℃℃
    4.Finish glazing in 9 minutes
    5.Maximum heating speed 200℃/ S
    6.Ready to use after power on, without 2 hours
    of preheating
    7.Active cooling
    8.Crown restoration 4-10(60mm dianeter tray)
    9.W*L*H:27*36*56cm AND 29*22*13.5cm

  • ELECTRIC POWER：
    Operation range：100-120V 50/60HZ 230V 50/60HZ
    Electric current：11.5ampere@110V 5.5ampere@230V
    Power：max 1200w

    POWER UNIT
    Voltage controller. The service life of the silicon elema is effectively prolonged.

    VOICE PROMPT
    Each stage has voice prompt. Program selection prompt
    to prevent using wrong program.
SEND AN INQUIRE

Related Products

Contact Us

Digital Dental Overall Solution 👇🏻

  • Professional R&D team

    Guaranteed technical update of equipment, tools and materials

  • Professional dental lab

    Guarantee that all products are fully validated

  • Specialized industrial workshop

    Industrial production ensures timeliness of global supply